| type | product code | maximum continuing service flow rate (lpm) | backwash flow rate (lpm) | minimum - maximum operating pressure (kpa) | inlet outlet (mm - male) | approx. shipping weight (kg) |
| multimedia | AFM09 AFM12 | 30 55 |
23 38 |
250 - 690 450 - 690 |
25 | 43 105 |
| carbon | AFC09 AFC12 | 9 15 |
16 25 |
250 - 690 | 25 | 19 45 |
| neutraliser | AFN09 AFN12 | 10 18 |
16 25 |
250 - 690 | 25 | 54 69 |
| birm | AFIB10 AFIB12 | 10 15 |
20 25 |
250 - 690 | 25 | 45 80 |
| greensand | AFIM10* | 10 | 20 | 250 - 690 | 25 | 65 120 |
| type | product code | operating parameters |
| multimedia | AFM09 AFM12 |
water temp 5° - 45° water ph 5.5 - 9.0 suspended solids max 100 mg / l iron no effect oil free of hydrocarbons Note: not recommended for Colloidal Sediment removal. |
| carbon | AFC09 AFC12 |
water temp 5° - 45° water ph 5.5 - 9.0 suspended solids max 10 mg / l iron will effect service life oil free of hydrocarbons Note: service flow rate may need to be reduced for extended contact time. Refer IBC Water. |
| neutraliser | AFN09 AFN12 |
water temp 5° - 45° water ph above 5.5 suspended solids max 50 mg / l iron max 0.5 mg / 1 oil free of hydrocarbons |
| birm | AFIB10 AFIB12 |
water temp 5° - 45° water ph 6.8 - 8.8 birm, 6.2 - 8.8 manganese greensand suspended solids max 50 mg / l iron & MANGANESE max 15 mg / 1 oil free of hydrocarbons BIRM min 15% dissolved oxygen of iron level |
| greensand | AFIM10* | Alkalinity should be greater than two times the combined sulfate and chloride concentration. Note: due to the complexities of iron, manganese and hydrogen sulphide it is recommended that product selection be referred to IBC Water. *intermittent peak flows of up to twice service are possible dependent on iron/manganese level for birm/greensand filters. |